Adding a gable roof to an existing roof – Tying a gable roof on an existing roof is a long and expensive project, usually carried out only when there is an important addition or renovation to a house. It’s not a job for beginners. You may need a structural engineer to help with the design of trusses and beams. Need help – and a big leap for construction debris. It needs a weather resistant shape while the roof is being replaced.
Determine where you will have your new adding a gable roof to an existing roof tethered to the roof. Tying an addition at the end gable roof of a house requires a type of structure; tying a roof perpendicular to the existing roof will be flour from another side. Take care of measurements to determine how many armatures you need. To moor on the side of an existing roof, put a new roof truss on the walls of the addition, vertical reinforcement, then complement chalk lines on the tiles to mark the centerline of the new roof valleys, where roofs will be connected Old and new.
Adding a gable roof to an existing roof, loop at the end of an existing gable roof by removing the existing facing panel, wall cladding and other obstructions to the first armature of the old roof. Then mount new armor on the new walls plus – top the first new truss against the old. Then install new ridge, tie to the old roof by the back cut of the original ridge overlap. Once new reinforcements are secured, the ceiling with board oriented filament of the wrap, place paper of roof and nails in Texas. Install the metal eave flap. Add the cladding and trim to the new gable roof finish.