Candle sconces for the wall – Add warmth of light illumination to your room with wall sconces. You can install candle sconces for the wall on any wall in your house to add the soft glow of candlelight or simply to achieve a traditional look for a room. It is important to mount candle sconces for the wall stud, so that it will not pull out of the wall. Wall studs are the structural framing boards in the wall. They are located a standard 16 inches on center, so you need not worry about finding one close to where you want the sconce.
Slide a stud finder along the wall in the general area where you want to Mount Redoubt. Select the nearest stud with a pencil at the height you want to Mount Redoubt. Place the mound on a flat surface face down. Center the paper on the back of the mound. Trace the outline of the back of the paper with a pencil. Punch a hole through the paper at each of the mounting holes. Remove the paper from the back of the mound.
Drive the screws included with the candle sconces for the wall at each mounting whole mark with a screwdriver. Let screwing about 1/8 inch from the wall. This will permit the mounting holes for sliding of the screws to hold the mound in place. Lift the mound and place it against the wall so that the holes are in line with the screws. Lower mound on the screws to secure the wall sconce.