Bamboo fencing rolls – Please measure of the wall or walls you want to cover. Buy enough rolled bamboo fencing to cover the area. The bamboo will be slats of vertically oriented fencing, so order enough to accommodate this. Unrolling rolls of bamboo fencing and support on the floor. Cut to size with a pair of sharp pruning shears. Because bamboo is a plant, pruning shears are appropriate. In addition, the fine wire used to attach the bamboo slats is easily cut with pruning shears.
Enlist in March the help of a friend to keep the bamboo fence to the walls you want to cover. The basics in place, using a staple gun. Place the staples 10 to 12 inches into columns, starting from a ridge of fencing. The basic columns should be approximately 3 feet apart. If fencing combed between columns, simply add another column of staples. If the bamboo fencing rolls is light enough, you can use glue facing to attach to the wall. On the other hand, if the bamboo fencing is made of large diameter bamboo canes.
You may need to install wooden battens every few feet on the wall and screw the fencing to the strips. Drill holes and use the cover screws. You may end wall bamboo fencing rolls covered with molding fourth round where it meets the floor. You can also finish the upper edge of the fencing with half cane moldings. Stain the molding a contrasted color before installing to add interest and combine with the decor of the room. You can even frame each panel of bamboo fence after hanging. With half reed molding. This works well in a large room such as a basement to give the room a cozy feel.
12 Picture Gallery: Homemade Bamboo Fencing Rolls as Wall Coverings
This post topic: Wood Fencing