Cupboard for Wine under Stairs

How to Build a Cupboard under the Stairs?

Build a Home Movie Theater

September 15, 2020 Other Design

How to Make a Greenhouse in A Budget?

Building a greenhouse is a great way to add time to the growing season of your garden. Although building a true glass greenhouse is next to impossible on any kind of budget, using copper pipes and plastic sheeting to build your greenhouse will allow you to get the benefits of a traditional greenhouse without the cost. It is also much easier to build a budget greenhouse, since they are smaller and easier to maintain. If you want to know how to make a greenhouse in a budget, you should stay on this page read the entire guide.

How To Make A Greenhouse Model

To start the process of how to make a greenhouse in a budget, you should prepare all these following materials:

12 Inspiration Gallery from How to Make a Greenhouse in A Budget?

Image of: How To Make A Greenhouse Plans
Image of: How To Make A Greenhouse Model
Image of: How To Make A Greenhouse Ideas
Image of: How To Make A Greenhouse Design
Image of: How To Make A Greenhouse Cheap
Image of: How To Make A Greenhouse Base
Image of: How To Make A Greenhouse
Image of: An Elegant White Greenhouse
Image of: A Unique Round Greenhouse
Image of: A Simple Greenhouse Image
Image of: A Nice Wooden Greenhouse
Image of: Small A Great Greenhouse
  • Measuring tape
  • Shovel
  • 8 rebar spikes, 2 feet each
  • Sledgehammer
  • 4 lengths of copper pipe, 10 feet each
  • Scissors
  • Plastic sheeting
  • Clamps
  • Rocks or bricks

If you have completed all the materials you need, you can begin your project. Choose a spot for your budget greenhouse. Use a measuring tape to mark out an area that is 4 feet wide by 6 feet long.

Dig out the space inside the area you measured. Remove all grass, sod, rocks and debris that are in the area, digging down from 2 to 4 inches. Place a rebar spike at each corner of your greenhouse space. Hammer in the spike so that at least 6 to 8 inches are firmly held in the ground.

Hammer in one rebar spike every 2 feet along the 6-foot sides of your greenhouse. Place spikes directly across from one another, as they will form the supports for your greenhouse. Bend copper pipes so that they form arches. Each copper pipe will need to be 10 feet long in order to cover the 4-foot distance across your greenhouse and form an arch.

RELATED:   Home Greenhouse Ideas

Place the ends of the copper pipes over the tops of the rebar spikes to make a curved frame for your greenhouse. Cut out three sections of plastic sheeting. Each one should be 2 feet wide and 6 to 8 feet long.

Alternatively, you can cover the entire greenhouse with a single sheet of plastic, although it is more likely to tear. Place the sheets over the greenhouse one section at a time. Use clip-on clamps to attach the sheets to the copper pipes and rebar spikes. Put rocks or bricks along the sides of the greenhouse to hold the plastic in place if necessary.

Cut two pieces of plastic to cover the ends of your greenhouse. These will act as doors. Use clamps to attach them to the top and sides of your greenhouse, and weight them down with bricks or rocks so that you can easily access your greenhouse. It doesn’t take a major investment to have a greenhouse. You can build a greenhouse to protect your plants through all sorts of weather, and protect your wallet from having to repurchase plants after a frost, drought or rainstorm by yourself. All you need to know and prepare is how to make a greenhouse in a budget.

Leave a Reply