Bamboo fencing – This job starting with digging holes measuring 1 foot deep and a minimum of 4 feet apart, a spar or for hidden digger. Put bamboo posts in the holes. Using a string to secure the tops is level. Tamp down after hole after filling. Note the inside of the post with 6, 12 and 24-inch space at the top. Pilot bore through the posts on each marker to keep bamboo split.
The keyhole saw to a drill and a bar in the gaps. Drill completely through the post when some in the hole increase power slowly. Repeat for each post. Hammer 24 inches long rebar in the ground to secure posts. With each post of rebar press down firmly to rebar is through bambuss membrane. Cutting straightest canes to cross boards corresponds to the inside dimensions of bamboo fencing panels. An additional blank must be allowed for bamboo prisoners shall ½ inch into the post.
Once you know the location of each piece of drilling a ½-inch hole in each post. Inserting the crosspieces. Rotate each to the right when you are in place. Nails for post with a nail long enough to penetrate post. Avoid striking bamboo fencing with nails or it may crack. If you have trouble installing an X graphics frame, enlarge hidden with a wood rasp. Draws on upright canes. Using a string to ensure they are level. Trim stick facing up. Then the nearest common end.