Metal fence posts – Remove a wire fence or move its position, take several steps. The first thread is unclipped, taken down and rolled. This leaves metal T posts that have been driven into the ground. Metal T Post also be damaged or bent and does pull out. Pull posts can not be done by hand, but with the help of a bumper or electrician jack and a loop of the chain simplifies the process.
Lock the two end links of the chain together by driving the bolt through the links, with a washer on each end of the bolt thread on the nut and pull it down hard. Position of the socket against the metal pole with hook bumpers touching metal fence posts. Slide bumper hook down to 12 inches above the ground.
Wrap the chain completely around the metal fence posts, starting at the side toward the socket. Take the two ends of the chain looped back around and drop them over the bumper hook. Ratchet jack handle, raise bumper hook and pull the chain tight around the post. Pull the top of the post to you while Jack hook up. Ratchet jack until the post is pulled completely out of the ground. Remove the chain from the post.