Led wall sconces indoor is typically screwed into the wall and can function electric light or light indoor. Like any other lighting, can finish on a wall sconce become dated or worn overtime. Perhaps you have found a set of wall sconces you admire in a thrift store, but do not like the color. Painting of metal sconce fixtures is a simple project, often ending in a single afternoon.
Dip a rag in paint thinner. Dry cloth over the surface of the led wall sconces indoor to remove any flaking paint or the protective clear surface on the mound recommend to the housing site. Rub 100-grit sandpaper over the surface. Forget all chipping paint or surface removed. It is important to rough up the surface so the new coat of paint adheres properly.
Tape any parts of the mound that should not be painted with masking tape. Be sure layer of tape overlap each other as droplets of color do not sneak through. Place a cloth on the floor or outdoor. Make sure the area is well ventilated. Spray paint the surface of the mound. Let it dry. Make sure led wall sconces indoor dries completely and does not feel sticky. Turn on the forecastle over and paint the back of the mound. Forget all the tracks and ornate designs are thoroughly coated in color. Let the mound to dry and apply a second coat if needed.