Fence post driver – To do sink fence post driver, let’s starting with set the distance should be between fence posts. Such distance will depend on the purpose of the fence and the local terrain. Then, select the specific location where you will drive fence post. Look for a location that appears without stones, dirt or potential sub-surface obstacles.
Place the metal fence post in the chosen location with the bottom tip resting on the ground. Check the fence post is pointed straight up and the right side of the post facing in your direction. Next, slide fence post driver over the upper end of the metal position until the driver rests on the end of the post. Grab the handle of the fence post driver in both hands and raise it several inches above his resting pulse position on top of a fence post.
Pull sharply downward frames on fence post driver until the driver top of the fence post with a powerful effect. The force that will drive the post in the ground. Last, repeat steps 5 and 6 until the fence post has been driven a sufficient distance to the ground. Remove fence post driver from the post and move on to the next location.